Lift The Back Cover Panel.

Peel the adhesive backing off of your first piece of wallpaper. First, find another place to keep your ice cream cold before you start! Plug them both into the same circuit, and if they both come on at the same time, you may not recognize that the circuit breaker has tripped until you open the door and the light doesn’t come on and the contents are less cold.

Replace With Appliance Bulbs No Greater Than 40 Watts.

Slide clear light shield toward back of compartment to release from light assembly. It can and does affect the cooling of the refrigerator. I have an old maytag refrigerator.

Unsnap The Grille At The Bottom Of The Refrigerator To Access The Coils.

Stick the middle of the piece to the front of the top of your fridge, taking care to smooth out any wrinkles. Going to try to post a pic with this so you can see what i'm talking about. If your coils are located on the back, you’ll have to roll the fridge out to get at them.

Cardboard At Bottom Rear Of Unit:

By the way, that back panel (cardboard or metal) at the bottom of your fridge back is important for more than keeping fingers away from the fan. Without this cover it will overheat and may burn out the compressor. Running the refrigerator on a separate, dedicated circuit is not a code requirement, but is a best practice and is recommended by refrigerator manufacturers.

Long Day Moving And Installing It Yesterday (Stupid Narrow Doorways!) And Despite A Few Other Hiccups, I Got It In And Put The Water Line In Today.

If the drain tube in the freezer gets plugged, water leaks into the compartment below or onto the floor. Shut off the water supply to the ice maker. Clean the coils with a special refrigerator coil cleaning brush to loosen the dirt and dust.