Fuel Tank Pressure Sensor Location Chevy. Press the sensor fully into the fuel tank module. Signs of a bad fuel.
How To Replace Fuel Tank Pressure Sensor 199200 Chevy from www.youtube.com
Start the van ( cold engine ) and remove the fuse. Acdelco gm original equipment 13502903 fuel tank pressure sensor : It is round about 3 inches in diameter, and has a fuel line on both sides of it.
The Fuel Pump Pumps Up Pressure And The Pressure Regulator Allows The Fuel To Return To The Fuel Tank If The Pressure Reaches 37Psi In The 4.6 Liter.
There is not really a fuel pressure sensor. There is a fuel pressure regulator. Look under the rear of the vehicle above the spare tire on a crossmember between the frame rails.
Lightly Lubricate The New Sensor With Clean Engine Oil.
Imageopen in new tabzoom/print remove the fuel tank strap bolts. Signs of a bad fuel. When lowering the tank, ensure that the fill neck on the tank does not get hung up on the chassis wiring harness.
The Fuel Pump Pumps Up Pressure And The Pressure Regulator Allows The Fuel To Return To The Fuel Tank If The Pressure Reaches 37Psi In The 4.6 Liter.
Instead, mine seems to be in the canister. Raise and support the vehicle high enough to access the top of the fuel tank through the wheelhouse liner. It's not real common for them to go bad and there are several other possibilities that can make this code appear.
The Fuel Tank Pressure Sensor Does All This By Monitoring The Pressure, Both Positive And Negative, Inside Your Fuel Tank.
Yes on top of the tank. It is round about 3 inches in diameter, and has a fuel line on both sides of it. Remove the fuel tank straps.
Also Keep In Mind That Your Feedback Is Important And I`ll Appreciate Your Time And Consideration If You.
Fuel pressure, (41 to 47 psi).if the pressure is good then the pump is ok. The tank needs to be dropped in order to service the pressure sensor. When the engine stalls, the fuel pressure will have been depleted in the rail.
